Price: [price_with_discount]
(as of [price_update_date] – Details)
[ad_1]
Immersion rod water heaters are very easy to use and a must have for all homes. This type of water heater is easy to store at home as well. VGold immersion rod will heat water very quickly and has a rated power of 1500 watts. Dip it in a bucket full of water as per instructions and switch it on. Rod is plated with Nickel so that the metal (Copper) does not corrode. If handled properly this item is safe to use and is shock proof. IMPORTANT INSTRUCTIONS & PRECAUTIONS FOR PROPER USE
- The bucket should be more than 30 cms deep and the rod should be hung with the help of hook on the rod.
- The heater should be dipped in water before switching it on and should be taken out only after the current supply is switched off and plug is removed from electrical socket.
- For personal safely, do not remove the immersion heater, immediately after switching off. This may cause damage to the immersion heater. Wait for 15-20 seconds after switching it off and then remove.
- Do not bring the immersion heater in contact with any combustible material, immediately after its withdrawal from water.
- The water level should be in the maximum and minimum range as marked on the immersion plate. Do not use the product without proper earthing.
Note: Black or busted or melted piece is not covered under warranty. This may occur due to dry heating i.e. heating without dipping in water and not following instructions. Please also note that the color of wire/plug and plastic holder may vary as per availability.
[ad_2]